| Wave Monitor LX View
PL-S1001 |
| LX View is a data viewing software for performing functions
including waveform display, saving extracted data portions, file conversion
and FFT analysis on data recording on the LX series of recording units
and the GX-1 (excluding multi sampling data). |
| · |
Data reading by the cursor line, zooming display of a
time-axis, and data saving of extracted portions are all possible. |
| · |
UFF(58) Universal File Format, ATI and RPC3, and the ASCII
data file saving formats are all supported. |
| · |
Both the FFT and the X-Y displays are supported. |
| · |
A Voice memo recorded as a WAV file can be replayed on
a PC, and the data can be extracted. |
| · |
RPM conversion of the data at the cursor position and
the statistical calculation of data in the display section are also possible. |
|
|
|
 |
| Advance File Converter
(AFC) NEO PL-S1002 |
| NEO PL-S1002 software converts files from the data file
format (TAFFmat), recorded on TEAC data recorders including the LX series
of Recording Units, to various data file formats including ASCII data.
With the batch processing function, two or more files can be converted
at once, thus increasing efficiency of data conversion. |
| · |
File conversion to DADiSP, ASCII, MATLAB, ATI (IDEAS),
WAV, Universal File, RPC3, TAFFmat, etc are all possible. You can specify
the extracted point by the number of scans, as well as specify the number
of skips. |
| · |
A batch processing registration screen menu of table type
is available for the collective conversion of multi files. The contents
of registration can be saved and reopened as a parameter file. |
|
 |
|
| PL-S1003 is software for the analog playback of TAFFmat
files (conforming to the data set of LX) on a PC using the LX Series Recording
Unit to which an analog output amplifier is connected. |
| · |
You can replay an LX-recorded data file that is being
displayed on the LX View, on a PC via an LX series analog output amplifier.
(LX View PL-S1001 is required.) |
|
 |
|
| You can download utility software including TEAC's own
TAFFmat waveform display software and data processing software etc. Please
refer to the download-page
for each utility's functions. |
| AIT Tape Download
Program for GX-1 GX View |
| GX View is a program for downloading information on an
AIT tape recorded by the GX-1, to the hard disk of a Windows PC. This freeware
also supports the waveform display function. |
  |
|
Analysis Processing
Systems Configuration Software
DASYLab (ver.5.6) |
| SASYTEC's DASYLab (ver.5.6) software allows customers
to freely construct an analysis processing system, utilizing the GX-1 as
a front-end machine. An analysis processing system can be easily constructed
by using a mouse to connect the graphical module icons on a worksheet. |
  |
|
Measurement driver
for MATLAB
GX-1_Driver |
| The GX-1_Driver is a real-time measurement driver used
to control the GX-1 Data Recording System with built in Signal Conditioner,
as well as to record and processing data using MATLAB. You can access the
measurement parameters required for data recording or display by controlling
the GX-1 thru MATLAB M-File. |
| · |
Spectra View can be used with the GX-1/LX series of Data
Recording Systems, and enables data recording, real-time monitoring, and
analysis. |
| · |
8-channel T-Y graph, bar graph, and 4-channel FFT graph
are provided as part of the real-time monitor. |
| · |
Data can be recalled and edited using such functions as,
screen display and printing of T-Y, X-Y, FFT2D, FFT3D graphs & FFT
color spectrum, as well as waveform operation, filter processing, averaging,
voice replay, and file manipulation. |
| · |
Printing of extended length paper is possible for T-Y
and FFT3D graphs. (GX-1 only) |
| · |
Hammering or tracking analysis is available through the
use of optional software. |
|
 |
|
| · |
A range of functions allow for the display, management,
analysis and output of digital data. |
| · |
Spreadsheet menu systems make for easy operation. No Programming
is required. |
| · |
More special analysis is possible using five optional
modules. |
| · |
It can be freely customized using function definitionEloop-processing
which consists of macros or the original language of DADiSP |
|
 |
|
| ME'scopeVES allows the visualization, analysis, and documentation
of static/dynamic motion and sound of a machine or a machines structure. |
 |
|
| This software with its wide array of visually displayed
functions, allows for the vibration and sound analysis of high volume multi-channel
experiment data that has been measured by various measuring instruments
or a data recorder. |
 |
|
| · |
Fast waveform display and easy extracting of required
data. |
| · |
Waveform display and extracting of required data can easily
be carried out on a PC. |
| · |
A number of methods of quickly moving a cursor line to
a desired point in the recorded data are possible. |
| · |
As well as the display and conversion of data into ASCII,
logging data can be put through a range of statistical operations which
include, X-Y display, FFT processing, max./min. value, and average value. |
|
 |
|
| · |
Frequency analysis can be conducted simply by deciding
the analysis range and inputting the analysis conditions. |
| · |
6 kinds of analysis, which include rain flow, maximal/minimal,
minimum/maximum, amplitude, time rate, and 2 dimensional time rate are
possible. |
| · |
Includes digital filter, offset removal, and spike noise
removal pre-processing functions. |
|
 |
|
|